The smallest NAS chassis on the entire network that supports standard ITX 17*17cm motherboards with dual drive bays (A1 mini printable)

This is currently the smallest dual-bay NAS case on the entire internet that supports standard ITX motherboards (A1 mini can also print), only supports small 1U power supplies, two standard 3.5-inch mechanical hard drives (it can also support other sizes of mechanical hard drives, if needed, download the STL and edit the slot), supports 17*17cm ITX motherboards. For assembly, please prepare several M3*6 and M3*8 screws. The back panel can be customized if you need to download STL and modify it. Note: Due to size constraints, this case does not have a dedicated location for a case fan, so only low-power CPUs can be used. It is also recommended to print with high-temperature resistant PETG, ABS, or nylon material. (This version has been specifically optimized for printing on the A1 mini. When printing, choose the regular tight-fitting supports and the hard drive box has also been optimized.)