N3RD solutions

cover

20220928_142024.jpg

20220928_142041.jpg

20220928_204401.jpg

20230208_135736.jpg

20230208_135742.jpg

20220928_065303.jpg

20220928_142137.jpg

driver & passenger

plate_1.png

DRIVERS ONLY

plate_2.png

passenger only

plate_3.png

acura integra door handle 1.png

acura integra door handle 2.png

acura integra door handle 3.png

this print profile is both passenger and driver door handles. with each plate labeled respectively.this uses “strong” tree supports, as i struggled over 8 times using normal support and abs.along with 6 walls (because its a very active component) and 50% infill to withstand the forces.this is auto orientated and arranged for best positioning and clean external look.I HIGHLY RECOMMEND SLOWING DOWN TO 50% SPEED UNTILL YOU GET TO LAYER 324. THIS IS WHERE THE 2 PARTS CONNECT. after this layer it will be strong enough to support the faster movements of the printer. (this was tested on a x1c, maybe a1 series don&#39;t need to be slowed down)

0.2mm layer, 6 walls, 50% infill

This is a 3D scan of an Acura Integra outside door handle that is discontinued from the factory and you can't find these in junk yards or even Ebay anymore. So I found one and scanned it. If you need the other side, you can mirror the part and have both handles.Save the classic Hondas!!! lolHopefully someone will be able to get into their car easier now. :)

94-2000 Acura Integra door handle

ASIA

Print Profile(1)

Description

Comment & Rating (18)

License

Related Models