Search models, users, collections, and posts
BMCU Snap-In Top Bar Mount Holder
IP Report
Print Profile(1)
0.2mm layer, 4 walls, 10% infill
Designer
1.9 h
1 plate
Open in Bambu Studio
Boost
139
393
21
7
262
210
Released
Description
This is a clean and simple top-bar mount for the BMCU.
The holder hooks onto the upper crossbar and is secured by gravity and geometry.
The mounting bracket slides onto the BMCU from both sides, clamping it securely in place.
For standard use, no additional hardware is required.
If desired, the two side parts can optionally be secured using an M4 threaded rod for extra rigidity — this is not necessary for normal operation.
Important:
Please measure the mounting holes of your BMCU before printing.
This version is designed for hole dimensions of 11 × 18 mm.
Different BMCU revisions may vary.
Features:
- Hooks onto the top crossbar
- Tool-less installation
- No additional hardware required (standard version)
- Optional M4 threaded rod reinforcement
- Clean, minimal design
Designed for easy printing and quick assembly.
If you like this design or found it useful, consider leaving a rating or comment.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (21)