FRITZ!Repeater Stand / Holder (Universal Schuko)

Transform your wall-mounted FRITZ!Repeater (e.g., 1200 AX) into a stylish desktop version! This holder is the perfect solution if your power outlets are hidden behind furniture or if you want to place the repeater freely in the room for better Wi-Fi coverage.

Features

• Clean Integration: Uses a standard Schuko socket (flush-mounted insert) that is securely screwed into the holder.
• Stability: The design is angled so that the repeater stands securely and does not tip over.
• Cable Management: Integrated pass-through for the LAN cable at the front and space for the power cable at the back.
• Easy Assembly: With M3 threaded inserts (heat-stakes) for durable and stable fastening of the socket.

Required Accessories

To complete this mod, you will need:

1. 1x Standard Schuko socket (flush-mounted insert + frame).
2. 2x M3 threaded inserts (Ruthex or similar) for heat-setting.
3. A power cable with a plug (for connecting the socket inside).
4. Optional: A flat Ethernet cable, if you use the LAN bridge.

Print Settings (Recommended)

• Printer: Bambu Lab P1S / X1C
• Material: PLA, PETG or ABS (Gray perfectly matches the FRITZ! design).
• Infill: 15-20%.
• Support: Can be printed without support.
• Wall lines: 3-4 for maximum stability of the threaded inserts.

Assembly Note

⚠️ CAUTION: Work on 230V components should only be carried out by persons with appropriate expertise. Ensure proper strain relief of the cable in the housing!

Happy printing! If you like the design, I would appreciate a rating and a photo of your setup!