Phase 10 Card Box - Storage Case for Card Games

This is a sturdy, fully 3D-printable storage box designed specifically for the Phase 10 card game. 

The original Phase 10 packaging is made of thin cardboard that tends to fall apart over time; this box is the robust, long-lasting replacement it deserves. 

It fits all standard-sized playing cards (56 × 87 mm), making it compatible with a wide range of card games, especially those by Mattel. The lid features the iconic Phase 10 logo, but a version without the logo is also included for a clean, universal look.

How to use it

1. Print all parts as described below.
2. To assemble the hinges, insert a short piece of 1.75 mm filament through the hinge pin holes on the lid and base. This is the only "hardware" needed; something every FDM printer user already has on hand.
3. It is strongly recommended to secure the filament pin with a tiny drop of glue. Use as little as possible so that the hinge remains free-moving.
4. Place your Phase 10 cards (or any compatible deck in 56 × 87 mm format) into the two internal compartments. Each slot accommodates a card stack up to 18 mm thick, which is more than sufficient for a full Phase 10 set.
5. Close the lid, the integrated latches snap shut securely, keeping your cards safe during storage and transport.

Print Settings

The lid currently features the Phase 10 logo, but a version without the logo is also available for a clean and universal look. If you would like a version with a different card game logo. feel free to leave a comment.