Trockenbox Silicat Creality Space Pi Trockner

🔥 Silica Gel Regeneration Box for Creality Filament Dryer

📦 Description

This box is specifically designed to efficiently and safely refresh silica gel (desiccant beads) in the Creality filament dryer

The open ribbed structure allows for good air circulation, while the box can be made from ABS to maintain its shape and easily withstand temperatures up to 70 °C

⚠️ Note:

The filament dryer is suitable for refreshing silica gel. A complete industrial regeneration is more effective at higher temperatures in an oven

🛠 Instructions – Regenerating Silica Gel in the Creality Dryer

1️⃣ Prepare the Box

• Fill with silica gel (max 70–80% fill height)
• Do not pack too densely → Air must be able to circulate
• Close the box loosely (not airtight!)

2️⃣ Dryer Settings
 

Recommended settings:

• Temperature: 70 °C
• Duration: 8–16 hours
• Optional: gently shake every 2–3 hours
   

The more saturated the silica gel, the longer the regeneration takes

3️⃣ Important Note on Air Circulation

For moisture to escape:

• Do not operate the dryer completely airtight
• If possible, allow for minimal ventilation
   

Without moisture removal, the regeneration time significantly increases

4️⃣ Expected Result

At 70 °C in the filament dryer:

✔ Beads become noticeably lighter

✔ Most of the moisture is removed

❌ Not always complete regeneration for highly saturated gel

For complete regeneration:

• 110–120 °C in the oven
• 2–3 hours
• Spread thinly

🎯 Area of Application
 

The box is ideal for:

• Maintenance of dry boxes
• Refreshing silica gel
• Continuous operation in utility rooms
• Energy-efficient alternative to an oven