HazmatSuit

cover

IMG_7249.PNG

IMG_7251.PNG

IMG_7253.PNG

IMG_7255.PNG

IMG_7256.PNG

Cone (AMS)

plate_1.png

Cone (no AMS)

plate_2.png

Cattura.PNG

94b37b515942aad2.png

Troverete 2 piatti distinti: uno per utilizzo di AMS con doppio colore e strisce, l&#39;altro per chi non ha un AMS o vuole i coni in singolo colore. Per un maggior dettaglio e precisione si consiglia di utilizzare un nozzle 0.2mm, ma facilmente stampabile anche con un 0.4mm. Se utilizzate il piatto standard ricordatevi di applicare un pò di colla per evitare che si stacchino durante la stampa.

You will find two distinct plates: one for AMS use with dual color and stripes, the other for those who do not have an AMS or want the cones in a single color For greater detail and precision, it is recommended to use a 0.2mm nozzle, but it is also easily printable with a 0.4mm If you use the standard plate, remember to apply some glue to prevent them from detaching during printing

0.16mm layer, 3 walls, 25% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002450518/design/569667b059ede3dd.jpg"></figure>Un piccolo accessorio per i nostri Garage in scala 1/64 o perfetti per i diorama stradali da corsa. Vicino a una curva o su un rettilineo non posso mancare!!!&nbsp;Troverete 2 piatti: uno per utilizzo di AMS con doppio colore e strisce, l&#39;altro per chi non ha un AMS o vuole i coni in singolo colore. Per un maggior dettaglio e precisione si consiglia di utilizzare un nozzle 0.2mm, ma facilmente stampabile anche con un 0.4mm. Se utilizzate il piatto standard ricordatevi di applicare un pò di colla per evitare che si stacchino durante la stampa.&nbsp;Sono in una fase iniziale, non ho molti progetti al momento, ma le idee sono tantissime, passa dal mio profilo per vedere cosa realizzo!

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002450518/design/569667b059ede3dd.jpg"></figure>A small accessory for our 1/64 scale garages or perfect for racing road dioramas Near a curve or on a straight they are a must-have&nbsp;You will find 2 plates: one for AMS use with dual color and stripes, the other for those who do not have an AMS or want the cones in a single color For greater detail and precision, it is recommended to use a 0.2mm nozzle, but it is also easily printable with a 0.4mm If you use the standard plate, remember to apply a little glue to prevent them from detaching during printing&nbsp;I am in an initial phase I don't have many projects at the moment, but I have many ideas Check out my profile to see what I create

Print Profile(1)

Description

IF YOU WANT TO SELL MY CREATIONS YOU MUST BUY THE COMMERCIAL LICENSE WHICH YOU CAN FIND HERE ON MAKER WORLD!!!

You can sell many of my models, why take the risk?

(if you are caught selling my products without a license, you will be reported and prosecuted for copyright infringement THIS IS NOT A JOKE!).

Comment & Rating (16)

License

Related Models

Cone 1:64