Mini ITX Case with full GPU Support and flex PSU
Print Profile(1)
Description
Hello Community, i designed my first ever project in Fusion. A Mini ITX case with full GPU Support and FLEX PSU.
Print Settings:
- 15% infill
- manuel Tree Support for the IO Shield
- i used PETG CF, i recdomend at least PETG
- GPU MAX 24cm Lenght!
Also you will need a Power Button 16mm, i used this one: https://www.amazon.de/dp/B0F1TP3R1B?ref=ppx_yo2ov_dt_b_fed_asin_title
And this one for the MB Screws: M3, 5x4: https://www.amazon.de/dp/B0D17FGQWW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
The filament: amazon.de/dp/B0DJ11F3VS?ref=ppx_yo2ov_dt_b_fed_asin_title (i reccomend to dry it first for at least 8 hours)
The Case and the Lid took me ages to print. The case was about 1D1h and the Lid About 8h. Maybe you guys know how to improve the model, the printtime or other things. Just let me know.
I unscrewd the rear pannel of the GPU so it can fit.
My Setup:
Prime Asus A320
Ryzen 7 5700g
16 GB RAM
Flex PSU
Asus RX 6600, 24cm lenght
Please check your mini itx motherboard for the correct alignment of the screws, and fix it by yourself :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)