LED base for luminous signs
Print Profile(1)
Description
The base is designed with slots underneath to allow light beams to escape, but if you don't like this effect, just don't turn the LED strip underneath.
I used this 1-meter natural white LED strip: https://it.aliexpress.com/item/1005007554723341.html?spm=a2g0o.order_list.order_list_main.5.4cb03696XZbK22&gatewayAdapt=glo2ita
It's very easy to install.
For the lettering above (or anything else you want to put), I used a pink PETG Translucent, but any other light-transmitting material works fine. In my case, I used 5% “Archimedean cords” infill because it seemed very open and also beautiful to look at (since the infill will be visible once illuminated).
The insert base must have a size of 10.80x277.60 mm. and it should be considered that it will enter about 5 mm inside the base.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)