Customizable Gridfinity Aerosol & Cylinder Holder
Print Profile(1)
Description
This is the fully parametric, fully customizable version of my original Gridfinity Bin Aerosol Can Holder.
Instead of downloading pre-made sizes, you can now generate the exact bin you need directly in your browser using MakerWorld's Parametric Model Maker. Just click the "Customize" button!
✨ Key Features:
- Fully Custom Dimensions: Adjust the Gridfinity base size (up to 6x6 for 256x256mm Bambu plates) and the overall height of the bin.
- Any Cylinder Size: Need to hold a tiny glue stick or a massive 100mm wide jar? Just adjust the Hole Diameter slider.
- Magnet & Screw Ready: Features standard 6x2mm magnet holes and M3 screw holes on the bottom. You can apply them to all grid units or just the outer corners.
💡 Quick Customization Tip:
When setting the Hole Depth, make sure you don't drill all the way through the bottom!
Formula for a solid bottom: Multiply your Grid_Z by 7, and subtract 7mm. (Example: If Grid_Z is 6, total height is 42mm. Set Hole Depth to 35mm to leave a strong 7mm thick base).
🖨️ Print Settings:
- Material: PLA / PETG / ABS
- 2 walls
Infill: 10% (Gyroid or Grid)
Boost Me (for free)
⭐ Thank you for supporting me!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)