3D打印挖掘姬

cover

尺寸标注图.png

1.jpg

黑色（磁吸孔尺寸可调，默认直径20、厚1.5mm）

plate_1.png

白色

plate_2.png

褐色（类似肤色的颜色均可）

plate_3.png

红色

plate_4.png

金色

plate_5.png

[separated parts multi-color version -- no AMS needed] fridge magnet scene -- 2026/02/27

磁吸孔尺寸可调，默认直径20mm，厚1.5mm

3.jpg

Multi-color PIP Fridge Magnet Scene

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>为我助力</boosttitle><boostcontent>您的支持是我前进的动力！</boostcontent></boostme><h3><span style="color: rgb(225,71,71)">模型分为“全拆件分色版（无需AMS）”和“多色一体打印版”。</span></h3><h3><span style="color: rgb(225,71,71)">由于多色一体打印版涉及多次换色切料，因此“多色一体打印版”建议拥有H2C/U1等多色多头打印机的用户优先考虑。</span></h3><h3><span style="color: rgb(225,71,71)">其他用户首推“全拆件分色版”。</span></h3><h3>※ 全拆件分色版装配说明：</h3><h3>1、各零部件最终请用胶水粘接固定，强化可靠性。</h3><h3>2、粘胶前请预装配，确定零部件装配位置，以免粘胶后误操作。</h3><h3>3、<span style="color: rgb(225,71,71)">请勿缩小尺寸打印</span>，改尺寸已接近下限尺寸，进一步缩小会导致细节打印不出来。</h3><h3>※ 冰箱贴的磁吸孔说明：</h3><h3>1、磁吸孔默认尺寸直径20mm，厚1.5mm，2个；如需DIY尺寸，请选择文件中“磁吸孔”对象（负零件）并对其进行缩放调整。</h3><h2><span style="color: rgb(225,71,71)">※ 友情提醒：天冷温度低，首层易翘边，打印前建议清洗打印版并涂胶，或者适当提高热床温度提升首层粘接性。</span></h2>

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Your support is my motivation!</boostcontent></boostme><h3><span style="color: rgb(225,71,71)">The model is divided into "fully disassembled multi-color version (no AMS needed)" and "multi-color Print in Place version".</span></h3><h3><span style="color: rgb(225,71,71)">Since the multi-color Print in Place version involves multiple color changes and filament cuts, it is recommended for users with multi-color multi-nozzle 3D printers such as H2C/U1.</span></h3><h3><span style="color: rgb(225,71,71)">For other users, the "fully disassembled multi-color version" is highly recommended.</span></h3><h3>※ Assembly instructions for the fully disassembled multi-color version:</h3><h3>1、Finally, glue and fix all components to enhance reliability.</h3><h3>2、Please pre-assemble before gluing to confirm component positions, to avoid incorrect operations after gluing.</h3><h3>3、<span style="color: rgb(225,71,71)">Do not scale down when printing</span>, this size is already close to the minimum limit, further reduction will result in loss of detail.</h3><h3>※ Instructions for the fridge magnet's magnetic holes:</h3><h3>1、The magnetic holes' default size is 20mm diameter, 1.5mm thick, 2 pieces; if you need to DIY the size, please select the "Magnetic Hole" object (negative part) in the file and adjust its scale.</h3><h2><span style="color: rgb(225,71,71)">※ Friendly reminder: When it's cold and the temperature is low, the first layer is prone to warping. Before printing, it is recommended to clean the build plate and apply glue, or appropriately increase the bed temperature to improve first layer adhesion.</span></h2>

Love You, My Older Self 3D Jigsaw Puzzle/Display Stand/Fridge Magnet/Mural (separated parts multi-color version, no AMS needed / multi-color Print in Place version)

ASIA

Print Profile(2)

Description

The model is divided into "fully disassembled multi-color version (no AMS needed)" and "multi-color Print in Place version".

Since the multi-color Print in Place version involves multiple color changes and filament cuts, it is recommended for users with multi-color multi-nozzle 3D printers such as H2C/U1.

For other users, the "fully disassembled multi-color version" is highly recommended.

※ Assembly instructions for the fully disassembled multi-color version:

1、Finally, glue and fix all components to enhance reliability.

2、Please pre-assemble before gluing to confirm component positions, to avoid incorrect operations after gluing.

3、Do not scale down when printing, this size is already close to the minimum limit, further reduction will result in loss of detail.

※ Instructions for the fridge magnet's magnetic holes:

1、The magnetic holes' default size is 20mm diameter, 1.5mm thick, 2 pieces; if you need to DIY the size, please select the "Magnetic Hole" object (negative part) in the file and adjust its scale.

※ Friendly reminder: When it's cold and the temperature is low, the first layer is prone to warping. Before printing, it is recommended to clean the build plate and apply glue, or appropriately increase the bed temperature to improve first layer adhesion.

Comment & Rating (0)

License

Related Models