Magnolia Embossed Bookmark | Shanghai Provincial Flower Embossed Bookmark | [Chinese Provincial Flower Bookmark Series]

🌟 [Magnolia Embossed Bookmark]

🎨 Introduction | Description

Magnolia, the provincial flower of Shanghai Province.

The Magnolia tree not only grows rapidly, but also has a beautiful tree form, fragrant and vibrant flowers, medicinal flower buds, and excellent wood quality. Due to its broad affinity with many species in the Magnoliaceae family, Magnolia can be used as a carrier to cultivate and improve the excellent traits of various Magnolia species, enhancing their ornamental value in gardens.

This is one of the [Chinese Provincial Flower Bookmark Series]. We hope you like it.

🚀 Core Technology: hicolors-3d

This model is generated using the hicolors-3d workflow, which offers the following advantages compared to traditional processes:

No AMS color change system required: Adopting a layered color change design approach, you can print the model without a color change system; just manually change the filament at the corresponding layer, resulting in extreme material saving.

Precise Layer Height: By physically simulating all possibilities of superimposed colors, the effective height is allocated to a limited layer height, saving layer height occupancy.

Intuitive Matching: Based on color and region matching logic (eliminating situations where regions cannot be matched to desired colors), it is more intuitive than traditional grayscale matching.

Physical-Level Simulation: The preview effect is the print effect, precisely simulating color superposition at different layer heights.

Light and Shadow Aesthetics: Specifically designed for FDM printing, fully utilizing the light-transmitting and color-stacking properties of PLA and other materials.

🔄 Color Change Instructions | Color Change Instructions

No multi-color printer (AMS) required; a regular single-nozzle machine can perform manual color changes:

Color change information is already included in the 3mf file; just download and view it.

Here is the filament information used for printing, for your reference:
Base/Start Color: black - TD: 0.1

| Color Change Height | Accumulated Layers | Change to | Brand | HEX | RGB | TD |

|----------|----------|--------|------|-----|-----|-----|

| 0.64mm | 7 | white | - | #ffffff | rgb(255, 255, 255) | 4.4 |

| 1.12mm | 13 | brown | - | #694526 | rgb(105, 69, 38) | 0.4 |

| 1.28mm | 15 | white | - | #ffffff | rgb(255, 255, 255) | 4.4 |

| 1.60mm | 19 | Apricot | - | #ffffef | rgb(255, 255, 239) | 3.9 |

| 2.00mm | 24 | white | - | #ffffff | rgb(255, 255, 255) | 4.4 |

| 2.40mm | 29 | black | - | #000000 | rgb(0, 0, 0) | 0.1 |

| 2.56mm | 31 | green | - | #519b42 | rgb(81, 155, 66) | 2 |

| 2.80mm | 34 | white | - | #ffffff | rgb(255, 255, 255) | 4.4 |

🛠️ Print Settings | Print Settings

For best results, please strictly adhere to the following settings:

Infill Rate (Infill): 100% (mandatory)

Layer Height (Layer Height): 0.08mm

First Layer Height (First Layer): 0.16mm

Nozzle Recommendation: 0.2mm is recommended (for best detail), 0.4mm is also acceptable (the actual photo was taken with 0.4mm).

Model Scale: Do not adjust the Z-axis scale of the model to ensure correct layered color change information; you can freely adjust the X and Y-axis scaling to get the desired size.

Post-processing Tip: Quickly sweep a lighter over the model's surface to perfectly remove common fine stringing found in FDM.🔥

✨Click on the homepage to see more of our high-quality works

💰 Commercial Licensing and Support | Commercial License

Software Communication: Want to experience hicolors-3d software? Please follow our social media accounts. The Bilibili account has the same name.