Print Profile(1)
Description
Boost Me (for free)
Si te gustan mis modelos dame un boost para continuar creandolos
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 144.75x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#91202b PLA+ Elegoo Fire engine red Transmission Distance: 5.5
#d5ff01 PLA+ Sunlu Yellow Transmission Distance: 10
#4fb590 PLA+ Elegoo Sea green Transmission Distance: 1.6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Fire engine red
At layer #17 (1.44mm) swap to Yellow
At layer #24 (2mm) swap to Sea green for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)