Diamond Painting Organizer

This diamond painting organizer was requested by a customer. They like to do diamond paintings and they needed a better storage solution for their diamond beads. A customer had seen online that someone else had a diamond painting organizer and they thought it was super cool! They asked me if I would be able to make one like it and of course I said yes! The one that the customer saw was a fixed position one. They wanted to be able to adjust it's position as needed, so I came up with this idea!

• It has four different positions to choose from.
• You can lean it back all the way or if you want it to stand straight up you can do that as well. Or anything in between!
• It can hold up to 60 tic tac containers for you to put your diamond beads in.

There are supports on each one of the things, but they are pretty easy to remove. I found that on the organizer piece, it was easier to take plyers and pull off the supports. Just don't pull to hard! You can also use plyers to pull off the supports on the other pieces as well.

The hook with the notches in it hooks on to the bottom and the flat hook, hooks on to the top. When leaning it back, sometimes it will get stuck, so just lean it forward a little and then move it back.

The picture below is from the customer. The customer put some putty in the red circled part so that they could keep it in that position for right now. Plus, it makes it more sturdy.

P.S. I recommend turning the bed temp. up to 67 or a little bit higher when printing the organizer piece, just because it's a long print. I had a little bit of warping around my corners, but turning it up may help. Adding some glue may not hurt either!

           Wash Build Plate With Soap and Water Before Printing To Get the Best Possible Results!!

Print Settings

• Printer brand:

  Bambu Lab

   

• Printer:

  A1

   

• Rafts:

  Yes

   

• Supports:

  Yes