Quuuuuuito

cover

IMG_7675.jpg

IMG_7674.JPG

HANDLE

plate_1.png

HEAD

plate_2.png

HANDLE 2

plate_3.png

d18a53f63187b801.jpg

スクリーンショット 2026-03-02 21.47.34.png

The PLA handle is printed at an angle to improve strength and layer orientation.This angled setup helps increase durability during impact.However, depending on your printer and settings, printing at an angle may increase the risk of failure.If you experience printing difficulties, an alternative version is provided that prints the handle laid flat on its side.Please use that version if needed.

0.16mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

🥁 BRIO Drum 30181 互換ドラムスティック 🥁BRIO「ドラム 30181」用の互換ドラムスティックを作成しました。&nbsp;我が子はこの太鼓を叩くのが大好きです。 将来ドラムを叩いてほしい…という親心もあり、 両手で叩けるようにもう1本欲しくなりました。そして、子どもは高確率でバチをなくします。 私は紛失する未来を確信していました。そこで、互換性のあるドラムスティックを制作しました。<h2>🔧 仕様</h2><ul><li>ハンドル：PLA</li><li>ヘッド（打撃部）：TPU</li><li>ヘッド設定：Infill 12% / Wall 2</li></ul><h2>🔹 特徴</h2><ul><li>正規品のように本体へ収納可能</li><li>柔らかいTPUヘッドで優しい打音</li><li>家庭用3Dプリンターで造形可能</li></ul>TPUにPLAハンドルを押し込む際は少しコツがいりますが、 私は問題なく組み立てできました。ぜひトライしてみてください。※本モデルは公式製品ではありません。&nbsp;＿＿＿＿＿＿＿＿＿＿🥁 Compatible Drumstick for BRIO Drum 30181 🥁This is a compatible drumstick designed for the BRIO Drum 30181.My child loves playing this drum. As a parent, I hope they might play real drums someday— so playing with two sticks felt important.Also, let’s be honest: kids lose drumsticks. A lot.So I decided to design a compatible replacement.<h2>🔧 Specifications</h2><ul><li>Handle: PLA</li><li>Head (Tip): TPU</li><li>TPU settings: 12% infill / 2 walls</li></ul><h2>🔹 Features</h2><ul><li>Fits and stores in the drum body like the original</li><li>Soft TPU head for gentle impact</li><li>Home 3D-print friendly design</li></ul>Press-fitting the PLA handle into the TPU head requires a bit of technique, but I was able to assemble it successfully. Give it a try!This is not an official BRIO product.

🥁 Compatible Drumstick for BRIO Drum 30181 🥁This is a compatible drumstick designed for the BRIO Drum 30181&nbsp;My child loves playing this drum. As a parent, I hope they might play real drums someday— so playing with two sticks felt importantAlso, let’s be honest: kids lose drumsticks. A lotSo I decided to design a compatible replacement<h2>🔧 Specifications</h2><ul><li>Handle: PLA</li><li>Head (Tip): TPU</li><li>TPU settings: 12% infill / 2 walls</li></ul><h2>🔹 Features</h2><ul><li>Fits and stores in the drum body like the original</li><li>Soft TPU head for gentle impact</li><li>Home 3D-print friendly design</li></ul>Press-fitting the PLA handle into the TPU head requires a bit of technique, but I was able to assemble it successfully. Give it a tryThis is not an official BRIO product.

Drumstick (Compatible with BRIO Drum 30181)

ASIA

Print Profile(1)

Description

🔧 Specifications

🔹 Features

Comment & Rating (0)

License

Related Models