Print Profile(5)
![[Time-saving economical version] non-silk filament can choose this profile](https://makerworld.bblmw.com/makerworld/model/US456fb201c1bff4/643520828/instance/b43d82d7b9f1d909.png?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
Description
Boost Me (for free)
Thanks for the boost~
❗️❗️When removing supports, please hold the shell part to prevent breaking❗️❗️
Fourth Edition:
You can choose my newly uploaded profile~
Optimized the issue of breakage when removing supports due to the bottom being too thin
Optimized the potential spaghetti issue
Optimized support surfaces, support tree rigidity, etc. now the supports are very brittle
❗️It is recommended to clean the build plate before printing
————————————————————————————————————————————————————————————————
Third Edition: Two new profiles have been uploaded, both with thick supports and brim, tested on P1S with no issues
Second Edition: ⚠️⚠️⚠️A1 series build plates may experience movement and have a chance of failure, printing is not recommended, if printing, reduce speed, reduce speed, reduce speed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The sample is from this source file, my machine is a P1S, and there are no printing issues whatsoever!!!
🙏🙏🙏Please do not arbitrarily give low ratings, open-source models are inherently unpaid and based on interest, if you like my model, try to solve the problem, I am not a merchant, I am not making money from you, so I do not accept bad reviews, I beg you!!!
⚠️⚠️⚠️It is recommended to first check your build plate adhesion, filament moisture level, local temperature, printing speed, machine model, etc
You can check Xiaohongshu for the reasons for spaghetti, and troubleshoot potential spaghetti factors appearing on your printer
Additionally, I am also making further modifications and improvements to the model. I hope everyone understands 🙏 Free and open-source is not easy, please do not arbitrarily give low ratings 🙏
——————————————————————————————————————————
The supports are quite complex and a bit difficult to remove
It is recommended to print with silk filament 🫶
Parameters have been adjusted, speed has been reduced, it prints out very shiny~
Can hold small jewelry
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (6)