Wire-Rack-Shelves - 14", 16" and 18"
Print Profile(6)
Description
Clip-on 13-½" X 6" tray that attaches to 1" post of 14" deep wire shelving. To install, clip shelf onto 1" post; slide up and down until it click into post grooves. Locks in place with retainer clips (do not glue). Clips can be removed for repositioning.
On centers of 1" post on wire shelving is 12-5/8". There's some flex on my support bracket clips - plus / minus 1/8".
Should fit posts on centers between 12-½-12-¾"
- Assembly - there a four hexagonal posts to locate tray on support bracket for glueing.
- All my print profiles are in PLA, 2X wall and minimal infill for quick prints. Parts has held up for me. Adjust as needed.
03/03/2026 - Print split into 4pcs + clips so it now fits X1,P1,P2 & A1 printers. Two print profiles added. One specifically for the A1 Mini.
Once glued properly, I think is perfectly serviceable.
- 03/04/2026 - Added print profile for 16" wide version.
- 03/05/2026 - Added print profile for 18" wide version.
- 04/23/2026 - Added retainer clip to 18" wide version. Was missing.
Please give me a boost if you found this print useful and post comments on the good, the bad and ugly.
Thanks!
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (36)