Daily Home Task Slider

The Daily Home Task Slider is a modular to-do board for the household
Each task can be switched between 'open' and 'completed' via a mechanical slider The status is indicated by colored positive and negative tiles

The system is ideal for families, shared flats, or for personal daily structuring

All components are printed separately and then assembled

Printing Instructions

• Print all parts individually
• The labels for the signs are applied either:
  • by hand after printing
    or
  • directly in the slicer using the text function before printing (recommended for clean results)

Two-Color Printing

The model is designed so that a pause in the slicer can be set at an appropriate point for a 2-color print to perform a manual color change

The color separation is designed so that the change is clean and requires no post-processing
An AMS or automatic multi-color system is not strictly necessary

Assembly Instructions

1. Insert Signs
   After printing, the finished signs are slid laterally into the designated guides of the board
2. Glue in Status Tiles
   The positive and negative tiles are glued into the designated recesses of the sliders
   For example, superglue or a suitable plastic adhesive is suitable
3. Insert Sliders
   The sliders are inserted into the board's guide with light pressure
   Depending on printing tolerance, it may be a bit tight at first
4. Optimize Running Surface (optional)
   If the movement is stiff, a very small amount of WD-40 or a comparable lubricant can be applied to the running surface

Note

The fit depends on the printer, material, and print settings
For a very tight fit, minimal post-processing or slight lubrication may be required