nimonsta

cover

1000041311.jpg

1000041183.jpg

1000041182.jpg

swu-credit-token-1.jpg

swu-credit-token.jpg

plate_1.png

088193c9f0816db5.jpg

<h2>🖨️ Recommended Print Profile: &#34;High-Detail Metallic&#34;</h2>This profile is optimized for the Star Wars Credit - Ultra-Clean Edition, ensuring sharp edges on the tech-pattern and a smooth, coin-like finish.<h3>🛠️ Profile Highlights:</h3><ul><li>Layer Height: 0.16mm (High Quality) – Essential to capture the fine 0.6mm detail of the top pattern.</li><li>Wall Loops: 3 – Provides a solid, weighty feel to the credit.</li><li>Top Surface: Ironing enabled (Topmost surface only) – Gives the &#34;Gold&#34; and &#34;Silver&#34; sections a professional, metallic sheen.</li><li>Infill: 15% (Grid) – Sufficient for a small token; use 100% if you want a heavy, realistic &#34;heft.&#34;</li></ul><h3>🎨 Color Change / AMS Settings:</h3>The model is designed for a color swap to make the pattern pop:<ol><li>Base Layer (0.0mm - 2.4mm): Use Yellow, Gold or Bronze PLA.</li><li>Pattern Layer (2.6mm - 3.0mm): Use Silver, Chrome, or Light Grey PLA.</li></ol><blockquote>Note for Non-AMS Users: If you don&#39;t have an AMS, simply add a PAUSE at layer height 2.6mm in your slicer to manually change the filament.</blockquote><h3>🧪 Material Recommendations:</h3><ul><li>Silk PLA: Highly recommended for that authentic &#34;Galactic Credit&#34; look.</li><li>Print Bed: Textured PEI plate works great, but a Smooth PEI plate will give the bottom a &#34;minted&#34; look.</li></ul>

0.2mm layer, 2 walls, 15% infill

<h2>Star Wars Credit Token</h2>Bring the economy of the Outer Rim to your gaming table! This Star Wars Credit is designed specifically for fans of Star Wars: Unlimited, Legion, or general cosplay. Unlike many overly complex models, this version features a clean, geometric aesthetic that prints perfectly even at small scales.Designed with a 0.6mm recessed inlay, this model is optimized for manual filament swaps or Bambu Lab AMS systems.<h3>Features</h3><ul><li>Authentic Dimensions: 31.0mm x 17.0mm x 3.0mm.</li><li>Dual-Color Optimized: The pattern is raised exactly 0.6mm from the recessed base, ensuring a sharp contrast.</li><li>Ultra-Clean Geometry: No messy scan data; every line and &#34;bit&#34; is a clean geometric primitive for a smooth finish.</li><li>Print-Ready: The bottom is perfectly flat for excellent bed adhesion.</li></ul>

Star Wars Unlimited Credit Token

ASIA

Print Profile(1)

Description

Star Wars Credit Token

Features

Comment & Rating (0)

License

Related Models