Hero Villains Alien Pirate

I am a father of two beautiful daughters and I enjoy introducing them to the multiverse through 3D Printed nerd objects.
This is one of the models from my collection, which I share with those who love 3D printing, also to receive constructive advice and always improve.
I am a big fan of Bambu Lab and all my prints are made with P2S and A1 mini

I make test prints at a reduced scale (10 cm) to test the model's stability and yield.
But there's an important thing: if you print it larger, around 15 cm, in addition to gaining details you also gain ease of printing.
My advice? Enlarge it as much as you want but add a few more supports where needed. Proof that the print works is in the photos.
Only a minimum basic knowledge of slicing is needed. If you have doubts, write to me and I'll gladly help you

For testing, I printed it at 10 cm:
PLA Basic white
0.16 extra fine
hybrid tree supports
10 mm outer brim
0 mm object spacing

The supports are very delicate. They are removed without damage, but one by one, slowly, with tweezers and patience. No need to go Rambo on the support... or you'll cry

If you want to collect them all... come here (the trap is already set):

https://makerworld.com/it/@Gara/upload

Technical notes (the truth, not poetry)

I prefer to print in a single color and paint after priming with acrylic markers.
The colored images are just examples of coloring: then everyone goes with personal taste.
The design originated from an AI generation (Tripo), manually refined and tested in FDM to ensure real printability.
The "real" photos are the white single-color ones

The part that decides whether you print or curse: bed adhesion

I use CryoGrip Pro Frostbite and the adhesion is so strong that the prints seem to have taken out a mortgage on the bed: they never detach.
I mainly use Bambu filaments and have no problems

If you have a different setup:

Focus first and foremost on adhesion.
Use dry and quality filament.
Do things cleanly