Scoot And Ride Wall mount - version 2
Print Profile(1)
Description
Wall mount for Scoot And Ride – so you can free up more floor space and avoid tripping over the kids’ ride-on toys.
I have made two different versions for the Scoot And Ride. In this version, the handlebar faces upward. This version is more advanced and more fragile, but I prefer the idea of having the handlebar at the top, as the scooter then takes up less space in the room.
Print time: ~1 hour 45 minutes
Filament usage: ~61 g
Print settings
- Should be printed in PETG HF for sufficient strength
- Layer height: 0.2 mm
- Wall/perimeter layers: 5
- Infill: 25%
- Top shell layers: 8
- Bottom shell layers: 8
Hardware
Use mounting hardware appropriate for your wall type (e.g., wood screws, masonry anchors, etc.).
Safety
This mount is designed to hold one Dantoy scooter only and is not intended for any other purpose.
Use at your own risk. Ensure proper and secure wall mounting before use.
Feedback
Suggestions for improvements are very welcome.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)