Tomdry

cover

WhatsApp Image 2026-03-06 at 17.13.21.jpeg

2.png

plate_1.png

6707bd76d2444a7a.jpeg

0.08mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>The print was great? Boost me for free! Thanks!</boostcontent></boostme><ul><li>Materialsparend</li><li>Dünne Spitze mit genügend Abstand zu den Außenwänden in einer USB C Buchse</li><li>Flexible Spitze</li><li>nicht elektrisch leitend!</li></ul>Benutzungstipp:<ul><li>Lasse dass Tool an der Außenwand anliegen (keine Berührung mit den elektrischen Kontakten in der Mitte)</li><li>Ziehe von der Mitte nach Buchsenende</li><li>Drehe danach das Handy/Gerät und bearbeite die andere Seite</li><li>Selbes auf der gegenüberliegenden Seite → Siehe Bild mit roten Pfeilen (Arbeitshandy)</li></ul>&nbsp;&nbsp;&nbsp;

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>The print was great? Boost me for free! Thanks!</boostcontent></boostme><ul><li>Material-saving</li><li>Thin tip with sufficient clearance from the outer walls in a USB-C port</li><li>Flexible tip</li><li>Not electrically conductive!</li></ul>Usage Tip:<ul><li>Allow the tool to rest against the outer wall (no contact with the electrical contacts in the middle)</li><li>Pull from the center towards the end of the port</li><li>Then rotate the phone/device and clean the other side</li><li>Repeat on the opposite side→ See image with red arrows (work phone)</li></ul>&nbsp;&nbsp;&nbsp;

Print Profile(1)

Bill of Materials

Description

Comment & Rating (0)

License