Gmktec G3 Cooler
Print Profile(1)
Description
GMK Tec G3 Cooler
I recommend using a Thermalright TL-8015w fan. It is connected in addition to the CPU cooler connector. Remove the board completely and simply tap the cables using solder/weld connectors.
(GMKtec pins: red = +5V, black = GND, yellow = sense, blue = PWM) (Thermalright pins: 1 = 5V, 2 = GND, 3 = sense, 4 = PWM)
If pin 4 (PWM line) on the Thermalright is left disconnected (recommended), the fan runs at a constant low speed (since it's a 12V fan running on 5V). Combined with an Arctic M2 Pro SSD heatsink, the SSD now stays cool (40°C). The fan is completely inaudible.
Printed in PETG-HF, with PLA as the support interface layer. Can be changed to personal preference.
I accept no liability or warranty — this is purely a description of my own personal project.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)