Toddler Memory Game Cards 6 Pairs 60x60x4mm

These are toddler-friendly Memory game cards (the classic matching pairs game with face-down cards). The set is intentionally small, with 6 pairs, to keep the game fun and manageable for very young children. With more pairs, a toddler game often turns into random flipping and frustration. With 6 pairs, they can actually remember and improve, and a round stays short. 

Each card is a 60 × 60 × 4 mm tile with rounded corners and a large, high-contrast icon that’s easy to recognize.

The design uses a shallow inlay approach: the base tile is printed in one solid color (I used blue), and the icon is printed as an inlay in a second color. This keeps the look clean and makes the icons durable even with lots of handling.

The project is set up for multi-color printing. With an AMS it’s straightforward, but manual filament swaps also work well because each plate only uses two colors (base + icon).

Included
One 3MF file with the complete Memory set (6 pairs), pre-aligned and grouped across multiple plates (ABS)
Individual STL files for each icon and matching inlay base (for easy remixing, recoloring, or expanding the set)

Printing notes
Recommended layer height: 0.20 mm
No supports required
Print one plate at a time (2 colors per plate)
Use an non-transparent/dark base color to avoid color show-through
Designed and printed in ABS (P1S). PLA should also work, but adjust temps and cooling for your filament.