Flux_tealight

FLUX TEALIGHT – Elegance and Atmosphere 🕯️

I printed this set of three candle holders and the result is truly spectacular. The "slatted" design creates a unique play of light and shadow on the surfaces, making them perfect as a centerpiece or for creating atmosphere at home.

• Modern Design: The three different shapes (chalice, bulb, and crown) work very well together as a set, but each has its own distinct personality.
• Light Effect: The open structure does not hide the LED's brightness, but frames it, diffusing a warm and soft light.
• Suitable for tealight candles up to 39mm in diameter
• I deliberately separated the three parts, each on its own plate, to ensure greater precision on the diameters. You can print all three on a single plate if you wish

🛠️ Printing Tips:

• Material: I used Bambu PETG Translucent (as seen in the photos) and it is the best choice for allowing light to pass through the design's walls. Due to the somewhat “delicate” geometry, the absence of infill, and the not-so-easy-to-print material (PETG Translucent), I significantly slowed down the print by modifying several parameters. Excellent results can also be achieved with PLA Translucent or regular PLA, greatly reducing printing time

  I recommend being very careful when removing the brim from the tallest part, which has no base

   

• Safety: I strongly recommend using LED tealights! If you want to use real candles, I DO NOT GUARANTEE HEAT RESISTANCE!!