Arc Pinches for Climbing Wall
Print Profile(1)
Description
Disclaimer: Use at your own risk. There is no certainty of print quality. I have had no issues with strength or delamination, but your holds may break on you.
The print profile has TPU for AMS. The texture benefits greatly from sanding for matte texture. The models should have no issues with PLA or PETG.
The included .SCAD file allows you to customize the pinch. The parameters are straight forward but it won't render if you make the angles impossible or increase rounding beyond the size of the hold.
If you generate your own model, you can add fuzzy skin to only the edge like in my .3mf by clicking the model on the plate and selecting ‘fuzzy skin painting’. You can use the fill option set to a low angle to automatically paint only the pocket area. For these models I had to set it in the range of 0.5 to 1 to prevent the fill from applying beyond the edge.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)