MiniMesh Lite Case - Bytek Style Design

This design is specifically created for the **MiniMesh Lite NFR** device. Blank (pattern-free) versions of the front and back covers have also been added to the model. This allows you to easily add your own patterns or texts to the covers using your slicer software.

This product is for **personal use**. **Commercial use is prohibited.**

The model can be customized and **shared with attribution** while maintaining the same license terms.

**Sharing on other platforms is prohibited. All rights reserved.**

**Required screws:**

• 4 x **M3x20** screws and nuts
• 4 x **small screws of appropriate size for PCB mounting**

An appropriately sized spacer has been included in the product to separate the battery and the PCB. You can use it optionally. Double-sided tape can be used to reduce any wobble that may occur between the battery and the back cover.

**Print settings:**

• **Material:** PLA
• **Wall count:** 4
• **Infill:** 100%
• **Supports:** On
• **Layer height:** 0.2 mm
• **Ironing:** Top surfaces