JACK DANIELS ~ 2-Sided Hanging Pub Style Lightbox

NOTICE!!! ***I WILL BE OUT ON VACATION 6/10/26 ~ 6/15/26*** NOTICE!!!

All Compatible Lightbox Frames & Mounts Available Here!
 

🛠️ Recommended Gear

Check out my Amazon Storefront by clicking here!

Bed Adhesion (Fix First Layer Issues)         Magnets (for optional mounts)

Recommended LED Light Strips     Battery Powered LED Light Strips     Double Sided Tape for Lens: Optional

Custom One-Off Designs Available - CLICK HERE

Printing tips are located at the bottom of this listing

___________________________________________________________________________

This custom PUB -style lightbox is a fully 3D printed, double-sided wall sign designed to hang from a faux black pipe bracket with chain — all printed, no metal required.

The entire setup (pipe, brackets, chain, and lightbox housing) is 3D printed. The only hardware needed is your own LED strip kit. The example shown uses a wireless battery-powered LED strip with remote.

***I have included optional plates with holes for wiring. Print the optional Body and optional Pipe(once) if you intend to use wired LED lights.

Features

• Overall lightbox size: 185 mm × 243 mm
• Double-sided illuminated panel
• Fully 3D printed faux pipe + chain hanger
• (AMS friendly)
• Clean, simple assembly

Printing Notes          

• Designed for use with Battery-powered LED strip lighting inside the box
• PLA works great for indoor display
• PETG recommended if installing in warmer environments
• Adjust LED brightness to get the glow level you prefer

FILAMENTS USED

• Bambu Basic PLA - Black

• Bambu Basic PLA - Jade White

   

  
   

_________________________________________________________________________________________________

Thanks for downloading from Chopper Originals.

If this print earned a spot on your printer and you’re out of Boosts, consider buying me a coffee ☕ to help support future designs and releases.

___________________________________________________________________________________

Affiliate Disclosure
Some links in this listing are affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.

____________________________________________________________________________________

Having issues getting that first layer to flow and stick good? Follow these steps, it helps! ***If using an enclosed printer, be sure to remove the lid and leave door open to avoid heat creep***

If using multiple brands/types of filament, you will need to save each as a Custom Filament setting. Otherwise the settings will change when your colors switch.