SwitchBot Universal Remote Charging Dock
Print Profile(1)
Bill of Materials
Description
Charging station for SwitchBot universal remote control
Uses the USB-C cable provided with the remote control
Prints with any material (PLA, PETG, ABS, ...) avoid TPU... ;)
Tip! (optional)
Insert a pause at approximately 20mm, and fill the bottom with fine, dry sand
Caution! not all the way to the top, leave 2-3 mm so that the nozzle does not come into contact with the sand and to avoid getting it all over the printer
This will add weight, providing an enhanced sense of solidity and improved stability, even if not strictly necessary
For example, you can use aquarium sand: https://amzn.eu/d/0dAfpQON
Requires 2 M3x20 screws
Assembly:
- Insert the USB cable into the holder by threading the cable through the slot (the fit is tight, which is normal)
- Insert the holder into the Dock
- Gently screw in the two M3 screws
- Adjust the cable in the designated groove
That's it, for a premium look, glue and cut a piece of black felt to the bottom, to protect your furniture and for a nice finish. (e.g. https://amzn.eu/d/03SPWZ72)
Boost Me (for free)
Love it? Boost it!
Thanks
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)