Mario-style rotating photo frame
Print Profile(1)
Description
Boost Me (for free)
This is a Mario-style rotating photo frame. The Mario pipe serves as a pen holder, and rotating the pen holder can rotate the photo frame
The photo frame has front and back sides, allowing two photos to be inserted from the top. Magnets are installed inside the photo frame, and the photo frame border can magnetically attract small decorative stickers
Suitable for 5-inch photos measuring 12.7 cm × 8.9 cm
Required accessories: neodymium magnets with a diameter of 5mm and a thickness of 3mm. If you don't want the small decorations, magnets are not needed; the magnets are for magnetically holding the small decorations
If you only install small magnetic decorations on one side, 30 magnets are needed; if both sides are installed, 60 magnets are needed
If you do not have an AMS, you can choose not to print the small decorative accessories. Only the small decorations require an AMS; the main photo frame body does not require an AMS
Installation pictures are as follows:
Step one:
Step two:
Step three:
Install magnets into the holes on the back of the photo frame, pushing them all the way in. Then combine the two frames into one
Step four:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)