Tube Extension for Closet Rods - Customizable
Print Profile(1)
Description
I made this piece to extend an oval closet rod. The one in the photos is fitted for a standard 30 x 15 mm oval rod from Leroy Merlin, but I am uploading this as a customizable model so you can easily adjust it to match the exact size of your tube.
Since this part is going to be holding up the weight of your clothes, I strongly recommend printing it in PETG. PLA will probably bend or snap over time under that kind of load.
⚠️ For maximum strength, it is very important to print this horizontally (lying flat). If you print it standing up, the piece will easily break right along the layer lines under the load. Because it needs to be printed flat, you will definitely need to use supports.
💡 Tip: If your rod has very rounded edges and you apply a large corner radius to the model, try printing it with a smaller layer height. It just helps
the curved edges come out much cleaner and gives a better overall finish.
Boost Me (for free)
👋 Enjoying my models? A like 👍 or boost 🚀 would mean the world to me. It motivates me to keep sharing more creations! ✨
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)