LILYGO TTGO T3 LoRa32 V1.6.1 Case + USR Button
Print Profile(1)
Description
This model is specifically designed for LILYGO TTGO T3 LoRa32 V1.6.1 hardware. A USR button can be added optionally. A 6 × 3.5 mm – 4.3 mm tact switch can be used for the USR button. Button connection pins are indicated in the visuals
To use the button feature, the appropriate firmware file must be downloaded and compiled from the relevant source
The model also includes blank (patternless) versions of the front and back covers. This allows you to easily add your own text, logos, or patterns to the covers using your slicer software
This product is for personal use. Commercial use is prohibited
The model can be personalized and shared provided attribution is given, while maintaining the same license terms
Sharing on a different platform is prohibited. All rights reserved
A 103450 type Li-ion battery is used for the device
Required Screws
- 4 pieces M3 × 20 mm screws
- 4 pieces M3 nuts
- 4 pieces small screws of appropriate size for PCB mounting
Double-sided tape can be used to reduce any wobble that may occur between the battery and the back cover
Recommended Print Settings
- Material: PLA
- Walls: 4
- Infill: 100%
- Supports: On
- Layer height: 0.2 mm
- Ironing: Top surfaces
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (22)