Suzuki Fuel Cap Retainer Clip Replacement　吉田工房

This is a replacement part for the fuel filler cap tether clip of the Suzuki Palette SW

It can be used if the genuine part is lost

It was measured from the actual vehicle and the balance between fitting strength and ease of installation has been adjusted

It is designed for printing with PLA+

As it is for outdoor use periodic inspection is recommended

Please use at your own risk

Recommended Filament SUNLU Filament PLA+2.0 1.75mm 1kg

Channel Information: On the YouTube channel I provide video introductions on how to use MakerWorld how to print using only a smartphone explanations of Bambu Studio settings and actual printing scenes

Making 3D printers more accessible and fun

Feel free to follow

Please try searching for "Yoshida Kobo no Nandemo DIY" 😊

This is a replacement clip for securing the fuel cap tether on the Suzuki Palette SW.
It can be used if the original clip has been lost.

The model was measured directly from the actual vehicle, and the design balances both secure fitting strength and ease of installation.

This model is designed for printing with PLA+ filament.
Since the part is used outdoors, periodic inspection is recommended.

Please use at your own risk.

Recommended Filament
SUNLU PLA+2.0 Filament 1.75mm 1kg

【Channel Information】

On my YouTube channel, I share tutorials about how to use MakerWorld,
how to print using only a smartphone,
Bambu Studio settings guides,
and real 3D printing demonstrations.

Making 3D printing more accessible and fun.

Feel free to follow!

Search for:
"Yoshida Workshop DIY"

This is a replacement part for the fuel tank cap retaining clip of the Suzuki Palette SW
It can be used when the original part is lost

The model was designed with measurements from the actual vehicle balancing fixing strength and ease of installation

This model is recommended to be printed with PLA+ material
As this part is used in an outdoor environment periodic inspection is recommended

Users are responsible for any risks arising from the use of this model

Recommended Filament
SUNLU PLA+2.0 1.75mm 1kg

Channel Introduction

On my YouTube channel I will introduce:

• How to use MakerWorld
• How to 3D print using only a mobile phone
• Explanations of Bambu Studio parameter settings
• Demonstrations of the actual printing process

Making 3D printing simpler and more interesting

Welcome to follow

Please search for:
Yoshida Kobo no Nandemo DIY