Easter Egg Painting Aid / Painting Device

Easter Egg Painting Aid

Simple aid for painting Easter eggs. Simply clamp an egg and paint it; the egg can be rotated using the side wheel.

Finally paint eggs and keep your hands clean ;-)

The set consists of:

• The frame
• The small parts (the rotating wheel and the two holders for the eggs)
• The spring that holds the egg
• Optional a base 
• Optional a cup for washing brushes, for example
• Optional a color palette

Printing Tips:

• It's best to print the spring and small parts with low layer height and supports
• It's best to print the frame with supports

Assembly:

1. Guide the rotating wheel with the long side through the frame from the outside
2. Inside, guide the spring onto the rod
3. Screw the egg holder onto the rod's thread
4. Clip the other egg holder into the frame
5. Tip: Depending on the print, the thread on the rotating wheel and egg holder might be a bit stiff at first. So, it's best to screw it on and off 3-4 times before assembly; after a few times, it will be much easier.
6. The base, color palette, and washing cup are optional; they do not necessarily need to be printed. Alternatively, a simple cardboard box can be used as a base. 
7. The base has indentations for the frame, the cup, and the color palette, so they just need to be placed on it and will have a secure stand.