Diego Armando Maradona Print
Print Profile(2)
Description
IMPORTANT
DIEGO ARMANDO MARADONA PRINT, I AM ATTACHING TWO PRINTS WITH THE MEASUREMENTS : “87X87” AND “150X150” BOTH OF WHICH HAVE A HEIGHT OF 2.24MM.
WHENEVER YOU MODIFY THE PRINT OF ANY SIZE, IT MUST HAVE A HEIGHT OF “2.24MM”!
IT IS ALREADY PAINTED, WHEN YOU CLICK THE “LAMINATE” BUTTON. IT WILL APPEAR TO PRINT IT ALREADY PAINTED LAYER BY LAYER.
INSTRUCTIONS
Project: maradonas
Print with 100% infill, layer height of 0.08 mm, and base layer of 0.16 mm.
The model measures 87 x 87 mm.
You can print with higher layer heights, below the base thickness of 0.48 mm.
The maximum allowed thickness is 2.24 mm and the actual thickness is 2.24 mm.
#080a0d PLA PolyLite Black: Transmission distance: 0.3
#062b4d PLA PolyTerra Military Blue: Transmission distance: 0.3
#4c5f71 PLA BambuLab Basic Gray Blue: Transmission distance: 3
#0086d6 PLA BambuLab Basic Cyan: Transmission distance: 3.5
#e2dedb PLA PolyLite White: Transmission distance: 5
This print uses 5 different filaments.
Change instructions:
Start with black filament.
At layer No. 8 (0.72 mm). Change to military blue
At layer No. 9 (0.8 mm), change to gray blue
At layer No. 12 (1.04 mm), change to cyan
At layer No. 13 (1.12 mm), change to white for the rest.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)