Organizer Voxel Bonsai Slot SD/microSD/USB
Print Profile(1)
Description
🌳 Voxel Bonsai - SD & USB Desktop Organizer (NO SUPPORTS)
Boost Me (for free)
If this Voxel Bonsai helped organize your desk without wasting any filament on supports, please consider leaving a Boost! 🌳💡 I spent hours engineering the perfect support-free layout and the custom tolerance pins to ensure a flawless print for everyone. Your Boosts directly support my work and help me design more free, highly-optimized models for the community. Thank you and happy printing! 💾
Bring a touch of digital nature and retro-gaming style to your desk. This Voxel-style Bonsai isn't just a geometric design sculpture, but a practical, engineered organizer to neatly store your memory devices: SD Cards, microSDs, and USB flash drives.
The model is optimized to be printed completely support-free. The tree is split in half and prints comfortably lying flat on the build plate, ensuring perfect outer surfaces and zero wasted material.
🖨️ Optimized Print Profile
This project includes a high-quality Monochromatic Profile, designed for a fast and clean printing experience.
- Print Time: ~8-9 hours per plate.
- Waste: Zero.
- Supports: None required.
- Recommended Filament: Matte Black, Stone Gray, or White PLA for a premium minimalist look.
🛠️ Assembly & Tolerances (The 3-Pin System)
To join the two halves flawlessly, I've designed hidden alignment holes. Since every printer handles tolerances differently, you will find a dedicated print plate with three sizes of cylindrical pins (7.8mm, 8.0mm, and 8.2mm). To make it 100% foolproof, the exact diameter size is engraved on the top face of every pin.
- 7.8mm (Loose Fit - Recommended!): Slides in easily. Use it with a few drops of CA glue (Superglue) for a permanent, clean bond.
- 8.0mm (Standard Fit): The nominal size. Depending on your filament's shrinkage, it may be a snug fit.
- 8.2mm (Tight Fit): Designed for a friction fit without glue. Requires a well-calibrated printer.
⚙️ Print Recommendations
- Resolution: 0.20 mm is ideal for the "blocky" voxel effect.
- Infill: 10-15% Zig Zag for speed and stability.
- Adhesion: If your plate is prone to warping, use a Brim to ensure the two halves remain perfectly flat for a seamless join.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)