Soap box SHAMPOO BAR Störtebekker or <68x68x23

Soap Box for SHAMPOO BAR suitable for Störtebekker or soaps 68mmx68mmx23mm

+++NEW+++ New Versions: Now new models without support (slope added to avoid)+++NEW+++

Storage box for solid shampoo intended for Störtebekker or other soaps with matching dimensions or smaller

The bottom part can simply be placed in the shower and as soon as you travel, the lid can be put on

Lid and bottom part hold firmly together by clipping the tabs and the lid does not fall off

I have different versions in the 3MF file

1. Box with colored lettering ‘SHAMPOO BAR’
2. Box with colored lettering ‘SHAMPOO BAR’ - A support material is used for the support interface layer - When printing PETG, PLA can also simply be used as a support layer (When printing PLA, PETG can then be used as an interface layer), which makes the support structures easier to remove
3. Box with embossed ‘SHAMPOO BAR’ - Single-color print
4. Box with embossed ‘SHAMPOO BAR’ - Single-color print - A support material is used for the support interface layer (See point 2)
5. Box without embossing - Single-color print
6. Box without embossing - Single-color print - A support material is used for the support interface layer (See point 2)
7. Box with colored lettering ‘SHAMPOO BAR’ - no support needed
8. Box with embossed ‘SHAMPOO BAR’ - Single-color print - no support needed
9. Box without embossing - Single-color print - no support needed

I would recommend printing in PETG due to its water resistance

Have fun printing & traveling - I would be happy to see pictures of your printed boxes ;)