Search models, users, collections, and posts
Deli 3.0m Tape Measure IKEA Pegboard Storage Holder
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
43 min
1 plate
Open in Bambu Studio
Boost
0
1
0
0
9
8
Released
Description
Content has been automatically translated.
📏 Say goodbye to messy drawers pegboard hanger designed specifically for Deli 3.0m tape measures
Is your Deli tape measure still "missing" in a drawer This model is precisely adapted for common Deli (as pictured) 3.0-meter plastic tape measures (typical dimensions: approx 66mm wide, approx 36mm thick) by mounting on an IKEA Skadis pegboard easy to access at a glance and effortless to put back ✨ Key Advantages
✅ Perfect Fit: The inner cavity is modeled according to the actual tape measure contour with side stops and bottom support to prevent shaking and falling off
✅ Pegboard Ready: The standard top hook is compatible with all IKEA pegboard hole spacings (25×25mm grid) for vertical hanging without obstructing view
✅ Lightweight and Durable: The hollowed-out design reduces weight while maintaining strength convenient to pick up and saves material both PLA and PETG can be printed 🛠️ Applicable Scenarios
Home DIY corner | Woodworking workbench | Renovation tool wall | Garage storage area | Maker space
——Keep your most used tape measure always within "arm's reach" 🖨️ Printing Suggestions
- Material: PLA (recommended) / PETG (requires higher toughness)
- Parameters: Layer height 0.15~0.2mm | Infill 15%~20% | nozzle 0.4mm 💡 Tips
1️⃣ Please confirm that your tape measure model is consistent with the common Deli 3.0m model (internal casing dimensions 68.6×38mm)
2️⃣ If the tape measure is slightly loose/tight you can fine-tune the fit by adjusting the print scaling (±1%)
3️⃣ It is recommended to combine with other tool accessories from the same series such as laser inclinometer dust plugs and grease injectors to create a unified style tool wall Tidiness starts with a small holder—give every tool its own designated place 🌟
Is your Deli tape measure still "missing" in a drawer This model is precisely adapted for common Deli (as pictured) 3.0-meter plastic tape measures (typical dimensions: approx 66mm wide, approx 36mm thick) by mounting on an IKEA Skadis pegboard easy to access at a glance and effortless to put back ✨ Key Advantages
✅ Perfect Fit: The inner cavity is modeled according to the actual tape measure contour with side stops and bottom support to prevent shaking and falling off
✅ Pegboard Ready: The standard top hook is compatible with all IKEA pegboard hole spacings (25×25mm grid) for vertical hanging without obstructing view
✅ Lightweight and Durable: The hollowed-out design reduces weight while maintaining strength convenient to pick up and saves material both PLA and PETG can be printed 🛠️ Applicable Scenarios
Home DIY corner | Woodworking workbench | Renovation tool wall | Garage storage area | Maker space
——Keep your most used tape measure always within "arm's reach" 🖨️ Printing Suggestions
- Material: PLA (recommended) / PETG (requires higher toughness)
- Parameters: Layer height 0.15~0.2mm | Infill 15%~20% | nozzle 0.4mm 💡 Tips
1️⃣ Please confirm that your tape measure model is consistent with the common Deli 3.0m model (internal casing dimensions 68.6×38mm)
2️⃣ If the tape measure is slightly loose/tight you can fine-tune the fit by adjusting the print scaling (±1%)
3️⃣ It is recommended to combine with other tool accessories from the same series such as laser inclinometer dust plugs and grease injectors to create a unified style tool wall Tidiness starts with a small holder—give every tool its own designated place 🌟
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)