Fallout Pipboy MTG Commander Deck Box
Print Profile(2)
Description
Fallout inspired 100-ct double sleeved commander deck box!
Materials Needed:
8x2mm magnets - 8x2 mm Magnets
Your Glue of choice. I prefer to use Stick Fast CA Thick adhesive with Mitreapel AC400 activator.
CA glue Stick Fast CA Adhesive
Glue Activator Activator
Filament:
Bambu Lab PLA Matte Desert Tan
Bambu Lab PLA Basic Yellow
Printing Profiles:
This was printed on the X1C and H2D. AMS required for logo inserts.
Assembly Instructions:
Everything is glued into place. Make sure your magnets are placed correctly! It's easy to accidentally flip one when gluing it into place in the opposite piece. To avoid mistakes, I typically glue all of the magnets into the deck box first. Then just put the opposing magnet on top of the magnets you just glued into place. Use something like a sharpie or other method of marking the top of the magnet so it's easy to identify which side needs to be place into the whole in the lid. Doing them one at a time avoids mistakes....so I've heard...because this has never happened to me....ever.... ;)
Not all inserts need to be printed. There are extra designs so that you can choose which of them you like the most!
Support me with a boost!
Boost Me (for free)
Please consider boosting me if you enjoy this model! I appreciate the support!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)