Omtech 50W Turbo-535 Honeycomb Holder
Print Profile(3)
Description
I have now uploaded an update, so you should now be able to find something suitable. Unfortunately, you will have to try it out to see what fits best for you
For your Honeycomb to sit centrally, it is important that you always use the same jaw thickness everywhere!!!
I was tired of the Honeycomb not having a fixed position
Then I had this idea and thought maybe I could help others by simply sharing the model
Print the main model and then select the necessary jaws from the print profiles
The Jaws1 are for the holders (right and left). You will need 4 pieces of these in your size
The Jaws2 are for the holders (top and bottom). You will need 2 pieces of these in your size
For me, the jaws with 0.5 mm fit best (perhaps as a small hint)
Small note:
Leave the parts on the build plate as they are (!!! do not rotate !!!)
Otherwise, you might suddenly have the seam position on an edge that should lie flat
If you like the model, I would be very happy to receive a like and/or boost.
These boosts help me to continue sharing more ideas for free in the future.
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)