Rotatable Wind-Up Key for Real Vehicles
Print Profile(1)
Description
A little fun for yourself or to annoy friends (who wouldn't want to come to their car in the morning and find a rotating wind-up key on the roof? ;-) )
For attachment, simply insert 10 magnets (8mm x 3mm) carefully into the base from above (a small hammer and a screw will help).
For the rotating mechanism, you will also need:
1x Screw M8 x 60mm
2x Nut M8
1x small Washer M8
2x Standard Ball Bearing 608
First, 2 halves are glued together, then the nuts are inserted, and finally, the other two halves are glued. The ball bearings are inserted into the base from below (I used a hammer and a socket), then everything is screwed together with the screw.
If the key is not meant to be rotatable, you only need the magnets. The key is then simply glued rigidly into the base.
FOR DECORATION ONLY! DO NOT LEAVE ON THE VEHICLE WHILE DRIVING!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (22)