Print Profile(1)
Bill of Materials
Description
I was tired of differenct bottle opener models because they did not hold up. So i made my own, if you use it right it will hold for alot of abuse and its still
small, lightweight.
This design focuses on strength and reliability in a minimal form factor, making it perfect for keys, backpacks, or outdoor gear.
Despite its compact size, the opener features reinforced geometry so it can handle repeated use without flexing or breaking — provided it is printed with the recommended settings and materials.
Ideal for:
• Everyday carry (EDC)
• Camping & outdoor trips
• Gifts or quick functional prints
⚙️ Recommended Print Settings (Print Profile)
- Layer height: 0.20 mm
- Walls / Perimeters: 4–5 wall loops (important for strength)
- Infill: 75 %
- Top / Bottom layers: 4–5 recommended
🧪 Recommended Materials
- PETG
⭐ Preferred (great balance of strength & printability):
- PETG-CF
🏆 Best performance (recommended for heavy use):
- PA (Nylon)
- PA-CF / PA-GF
🛠️ Printing Notes
- Strength comes mainly from wall count and infill, so avoid reducing these.
- Print orientation is optimized for strength — avoid rotating unless you understand load direction.
- Dry filament is strongly recommended, especially for PETG-CF and PA.
- Increase nozzle temperature slightly for fiber-filled materials to improve layer bonding.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)