Squirrel Baffle Collar for Bird Feeder Hook
Print Profile(1)
Description
Tired of your squirrel baffle cone sliding down the pole and leaving your bird feeders unprotected? This retention collar locks onto your shepherd's hook pole and gives the metal cone baffle a solid, stable shelf to sit on. No more sagging, spinning, or slipping.
The collar clamps securely around the pole using four M4 bolts, and the standard metal cone baffle that came with your shepherd's hook rests right on top. It's a simple, sturdy fix for a problem every backyard birder knows.
What you need:
- 4x M4 screws (20mm or longer)
- 4x M4 hex nuts (approximately 7mm across flats)
- A small strip of double-sided tape (helps grip the pole and prevent rotation)
Installation:
- Slide the collar onto the shepherd's hook pole at the desired height
- Apply a strip of double-sided tape inside the collar or 2mm Solid Rubber Cord for extra grip
- Thread the four M4 screws through the holes and tighten with the hex nuts
- Set the metal cone baffle on top — done
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)