Modular Chainmail Coaster Series-Three_2.0-2.2

This series of models uses equilateral triangles as the basic unit, connected with a snap-fit hinge structure, which can be freely disassembled and assembled, as soft as fabric
This released version is the third set of equilateral triangle units, the fourth set can be found here, and more version combinations will be released subsequently

Because this series of models requires assembly and a certain degree of part fit, before printing, be sure to
perform flow rate calibration!
perform flow rate calibration!
perform flow rate calibration!
Otherwise, it may result in, but is not limited to: 1. inability to assemble; 2. overly loose assembly

Due to the small size of the connecting rod part, which is almost at the minimum limit of FDM 3D printers, and considering the strength of FDM printed parts, please choose a filament with a certain strength and layer adhesion. After multiple printing tests, the minimum required filament is PLA Basic. Most silk-type filaments have very weak strength, especially in terms of layer adhesion, and the connecting rods can easily break during disassembly and assembly, becoming single-use

Simple diagrams of the current combined versions and physical images after assembly (Print in Place) are shown below
1. Three_2.0

2. Three_2.1

3. Three_2.2

Due to small parts (connecting rods),
Please keep away from children under 5 years old and infants to prevent accidental ingestion!
Please keep away from children under 5 years old and infants to prevent accidental ingestion!
Please keep away from children under 5 years old and infants to prevent accidental ingestion!

This version set is first released on this platform, Please do not unauthorizedly repost on other platforms! Not for commercial use!For personal research and entertainment only, thank you for your understanding and cooperation

Finally, happy printing and enjoy assembling your own chainmail!