3d Bulbasaur Oversized Card
Print Profile(1)
Bill of Materials
Description
Oversized 3d Pokemon card.
Bulbasaur Full Art.
9 different Colors used. Pause at set layer height to swap to only require 2 AMS units. Feel free to simplify colors to meet your set up.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 142.93x200mm in size
You may print at higher layer heights below the Base Thickness of 0.52mm
The Max allowed Thickness is 2.52mm and the Actual Thickness is 2.52mm
#080a0d PLA Bambulab Black Transmission Distance: 0.3
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2
#0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5
#f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9
#ffe17f PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.92mm) swap to Blue Gray
At layer #14 (1.24mm) swap to BambuLab Green
At layer #17 (1.48mm) swap to Cyan
At layer #20 (1.72mm) swap to Hot Pink
At layer #23 (1.96mm) swap to Lemon Yellow
At layer #27 (2.28mm) swap to Jade White for the rest.
Bulbasaur model used Ziro Glacier Matte PLA Gradient, Bambu Olive Green, and Red.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)