Fuzzy Skin Osterhase

🐰 Minimalist with "Fuzzy Skin" Accents – Print-in-Place & No AMS

This Easter bunny combines modern, minimalist design with fascinating haptics. The most striking feature is the vertical ribbed structure of the egg-shaped body, which gives the model elegant, architectural lines. A well-thought-out technical detail is the use of the "Fuzzy Skin" function on the side surfaces as well as on the ears. This contrast between the smooth ribs and the rough, textured surface makes the model visually and haptically particularly interesting.

Design Highlights:

• Partial Fuzzy Skin: The inner sides of the ears are deliberately kept smooth, while the outer sides create a fascinating contrast with the Fuzzy Skin texture.
• Geometric Aesthetic: The combination of the organic egg shape and the strict, vertical lines fits perfectly into modern interior styles.

🛠️ Technical Details & Printing Tips

This model has been optimized for an absolutely problem-free printing experience ("Designer Approved Ease of Print"):

• ❌ No Supports: The bunny is designed so that all overhangs (especially on the ears) can be printed without supports. This saves material, time, and annoying post-processing.
• ❌ No AMS required (Single Extruder Friendly): The different textures are created purely by the slicer settings, not by material changes. Perfect for any standard printer.
• ✅ Print-in-Place: The model is one-piece and ready immediately after printing (after removing the brim, if used).

📏 Available Sizes

The download includes two perfectly scaled STL files:

1. Standard Size (Small): Height approx. 130 mm
2. Large Size: Height approx. 160 mm

💡 Recommended Slicer Settings (Slicing Guide)

To achieve the look as in the product photos, please note the following settings in your slicer (e.g. Bambu Studio, PrusaSlicer, OrcaSlicer):

• Fuzzy Skin: ACTIVATE (Essential for the ear texture!).
• Recommended Fuzzy Skin Settings: Point Distance approx. 0.1 mm, Thickness approx. 0.1 - 0.15 mm (depending on desired effect).
• Fuzzy Skin Application: To texture only the ears, use Slicer Modifier Shapes (e.g., cylinders or cuboids) in the slicer to limit the area to the ears.
• Layer Height: 0.12 mm for a clean representation of the ribbed structure.
• Infill: 10-15% (Grid or Gyroid).
• Perimeters: 2 perimeters are sufficient.
• Brim: Depending on build plate adhesion, a small outer brim (5 mm) can be helpful for stability during printing.

Share your prints! 

I would love to see your make photos and feedback in the comments. Happy printing and Happy Easter! 🥚🌷