Frogmin_97

cover

해파리.gif

plate_1.png

26b8891b2b510410.png

A satisfying mechanical fidget clicker inspired by the iconic jellyfish from SpongeBob SquarePants. Designed for a tool-less assembly and a crisp &#34;clicky&#34; feel.<h3>Components Needed </h3><ul><li>Switch: 1x Otemu Blue (or any MX-compatible 3-pin clicky switch).</li><li>Filament: Pink PLA (Body &amp; Legs).</li><li>No Adhesive: All parts are designed for a secure press-fit assembly.</li><li>Note: This design does not require AMS.</li></ul><h3>Printing Instructions</h3><ul><li>Infill: 15% Grid is recommended for durability.</li><li>Support: Required. It is highly recommended to use Tree Supports for the overhanging areas to ensure a smooth finish.</li><li>Orientation: Print the body dome-up and the legs as oriented in the slicer for the best results.</li></ul><h3>Assembly Instructions</h3><ol><li>Switch: Snap your Otemu Blue switch into the center of the pink body dome.</li><li>Legs: Align the legs with the bottom of the body and press-fit them firmly until they click into place.</li><li>Usage: Press the top dome to engage the switch.</li></ol>Ready to jelly-fish! Enjoy your clicky Jellyfish! Instagram → <a target="_blank" rel="noopener noreferrer ugc" href="https://www.instagram.com/frogmin_97/">fogmin_97</a>&nbsp;

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h3>Components Needed </h3><ul><li>Switch: 1x <a target="_blank" rel="noopener noreferrer ugc" href="https://ko.aliexpress.com/item/1005005876614581.html?spm=a2g0o.order_list.order_list_main.10.38eb140fMnOIfG&amp;gatewayAdapt=glo2kor">Otemu Blue</a> (or any MX-compatible 3-pin clicky switch).</li><li>Filament: Pink PLA (Body &amp; Legs).</li><li>No Adhesive: All parts are designed for a secure press-fit assembly.</li><li>Note: This design does not require AMS.</li></ul><h3>Assembly Instructions</h3><ol><li>Switch: Snap your Otemu Blue switch into the center of the pink body dome.</li><li>Legs: Align the legs with the bottom of the body and press-fit them firmly until they click into place.</li><li>Usage: Press the top dome to engage the switch.</li></ol>Ready to jelly-fish! Enjoy your clicky Jellyfish! Instagram → <a target="_blank" rel="noopener noreferrer ugc" href="https://www.instagram.com/frogmin_97/">fogmin_97</a>&nbsp;

Print Profile(1)

Description

Components Needed

Assembly Instructions

Comment & Rating (2)

License

Related Models