Print Profile(2)
Description
🔥 UPDATE🔥
Hello Makers!
I have adjusted the retention hook for the project to make accidental opening more difficult.
I also modified the loop for attaching the carabiner; it is now printed on only one side so there are no gaps where the air freshener could slip out!
Let me know what you think and if this modification is sufficient for you. If not, I will do my best to find a new solution!
Boost Me (for free)
Ditch the disposable air fresheners! 🌿
Print this reusable Minimalist Modular Air Freshener System.
Uses cheap cotton makeup pads and your favorite essential oils.
100% Print-in-Place (Shell hinge, clasp, and small carabiner all print integrated! Zero assembly!).
Zero Supports.
Eco-Friendly & Refillable.
Modular Hooks Included: Features a small PiP carabiner for car or backpack use, and a large hanger-style hook for closets or home decoration.
PETG is highly recommended for heat resistance.
Ditch the disposable, expensive, and ugly air fresheners! I designed this minimalist modular diffuser to be printed in one single piece (Print-in-Place), ready to use as soon as it comes off the build plate. It’s the eco-friendly, cost-effective, and stylish solution for fragrancing any environment.
🌬️ How It Works
- Snap open the air freshener (the hinge is printed integrated!).
- Insert 1 or 2 cotton pads.
- Soak the cotton with a few drops of your favorite essential oil or perfume.
- Snap it shut and place it. The cotton will gradually release the fragrance through the ventilation grid.
🔄 Total Modularity
- Minimalist PiP Carabiner: A small, functional carabiner, printed in one single integrated piece. Perfect for automotive use (hang it from the rearview mirror) or to attach to your backpack.
- Domestic "Hanger" Hook: A larger hook, similar to classic coat hangers. Turns the diffuser into the ideal accessory for fragrancing the inside of closets, wardrobes, or the bathroom.
✨ Key Features:
- 100% Print-in-Place: Both the main shell and the small carabiner are printed fully integrated. Zero post-print assembly required.
- Zero Supports: The entire design is optimized to print perfectly without any support material.
- Infinitely Refillable: Replace the cotton and change scents whenever you want. Eco-friendly and super economical.
⚙️ Recommended Print Settings - PAY ATTENTION WHEN YOU MOVE THE ARTICULATION FOR THE FIRST TIME!
- Recommended Material: PETG strongly recommended. Essential for car use (resists summer heat on the dashboard without warping) and better resists chemical degradation from essential oils. (In the example, I used Bambu Lab PETG Grey).
- Layer Height: 0.2 mm.
- Infill used: 100% (recommended)
- Supports: ABSOLUTELY NO. The design is self-supporting.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)