BTS ARIRANG Logo Pendant without AMS

Arirang BTS Pendant – Easily printable without AMS/ACE 💜

This Arirang pendant is inspired by BTS and was designed to be easily printed even without a multi-color system like AMS or ACE. This makes the model particularly beginner-friendly and accessible to a wide maker community

✨ Print recommendation for best results:
For an optimal finish, it is recommended to print the top layer at a reduced speed. Slow printing ensures a particularly clean and high-quality print – especially for fine details

🛠️ Recommended Print Profile (PLA):

• Material: PLA
• Nozzle: 0.4 mm
• Layer Height: 0.16 – 0.2 mm
• Top Layer Speed: reduced (e.g. 20–30 mm/s)
• Infill: 10–15 % (Grid or Gyroid)
• Print Temperature: approx. 200 °C (depending on filament)
• Heated Bed: approx. 60 °C
• Fan: 100 % from the second layer
• Supports: not required
• brim: optional (for better adhesion)

💡 Tip: If you make manual color changes, plan the pauses carefully for a clean result! The pause is at layer 11 and is already built-in

💜 License and Usage Note:
This model is an unofficial fan product and is intended exclusively for private and non-commercial purposes. There is no connection whatsoever to BTS, their labels or management. All mentioned names, terms, and designs related to BTS are the property of their respective rights holders

The sale of printed models or commercial use of the file is not permitted. Sharing the file is only permitted with attribution to the original source. Modifications to the model are permitted for private use, but may not be presented as an original or distributed commercially