Cam buckle with Quick-Release for Elastic Straps

I wanted a few simple can buckles, but when I looked around, I couldn’t find any that would withstand the strain I need them to. You see, I use these parts on my arms and legs for VR.

For bambuhandy users:

Select a printing plate (DEFAULT) -> Select only the width you need between 11 and 51 mm (deselect all others).

4 Printing plates:

[Default]: for the sewing machine  | [M3]: Without sewing, using an M3 screw 

[T0.2 versions] . T stands for tolerance in mm (for printers that aren't very accurate) !!!FOR BAMBU US DEFAULT!!!

band thickness: 1-1.20mm (By adjusting the Fuzzyskin, even thicker straps might fit in bambu Studio) 

Sizes: 11 mm | 17 mm | 21 mm | 26 mm | 31 mm | 38mm | 41 mm | 46 mm | 51 mm

a quick tip: Carefully remove the support and, before use, slide a carpet knife between the hinge until you hear a click. Then gently move it up and down.